Rent a virtual windows server in Asia

Currently, we do not offer a trial period.

The minimum payment period for our services is one month, ensuring flexibility and convenience for our customers.

The only way to change your default IP address is to order a new IP. It will cost you additional 3 €. Please note that IP addresses are assigned automatically it is impossible to choose a specific IP range.

“Unmetered bandwidth” indicates that there are no additional charges based on the amount of data transferred to and from your cloud server monthly. This feature enables worry-free data transfer without overage fees. Typically, personal or small business website operators do not exceed our fair usage policies. However, if you anticipate consistent, heavy bandwidth usage, our cloud servers may not be the ideal choice. In such cases, consider our dedicated servers with guaranteed channels . Note that excessive use on a cloud server can lead to bandwidth speed reduction as per our terms of service, ensuring fair usage for all clients.

Bandwidth Limits for Cloud Linux Server Solutions:

In Fujairah and Mumbai:
• 2TB/month for KVM-1-FJR, KVM-1-BOM, WIN-2-FJR, WIN-2-BOM plans.
• 4TB/month for KVM-2-FJR, KVM-2-BOM, WIN-4-FJR, WIN-4-BOM plans.
• 5TB/month for higher-tier plans.

In Lagos:
• 1TB/month for KVM-1-AF, WIN-2-AF plans.
• 2TB/month for KVM-2-AF, WIN-4-AF plans.
• 3TB/month for KVM-4-AF, WIN-6-AF plans.
• 4TB/month for KVM-6-AF, WIN-8-AF plans.
• 5TB/month for KVM-8-AF, WIN-10-AF plans.

Upon exceeding these limits, bandwidth is reduced to 10Mbit/s. For all other plans, bandwidth is up to 1Gbit/s, reduced to 100 Mbit/s if the 5TB monthly quota is exceeded.

Mail ports are filtered. You should contact our support if you need to open mail ports. Additional account verification may be required.

We use different CPUs like Dual Intel Xeon E5-2680v2 and E5-2680v4. However, it is not possible to choose a specific CPU when ordering a VPS

You can choose from Windows Server 2019 and 2022.

1. Login to Your Client Area and head to the Services list.
2. Select your Private Network from your service list.
3. Select the VPS from the available pool you would like to add a private network for.
4. Click on Save Changes

It will take a couple of minutes for the changes to be propagated to your vMesh network to be in Status Active / Ready.

Open Network Connections:

Press Windows Key + R, type ncpa.cpl, and press Enter.

Identify the Network Adapter:

Right-click on the adapter connected to the private network (e.g., Ethernet 2) and select Properties.

Configure TCP/IPv4 Settings:

• Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
• Choose Use the following IP address and enter:
  • IP address: YourAssignedIP (e.g., 10.0.0.2)
  • Subnet mask: 255.255.255.0
  • Default gateway: Leave blank.
• Click OK to save the settings.

Verify the Configuration:

ipconfig

Ensure the IP settings are correctly applied.

Additional Notes

• Firewall Configuration: Ensure that your firewall settings allow traffic through the private network interface.
• No Gateway Required: Typically, a gateway is not needed for the private network to operate.
• Choosing IP Ranges:
  • Common Private IP Ranges:
    • 10.0.0.0 to 10.255.255.255
    • 172.16.0.0 to 172.31.255.255
    • 192.168.0.0 to 192.168.255.255
  • Avoid Conflicts: Ensure the IP range you select does not overlap with other networks you are connected to.
• Testing Connectivity: You can test the connection by pinging another device on the private network:

  ping OtherDeviceIP # (e.g., 10.0.0.2)